一、Service簡介1.服務發現與負載均衡資源Service Ingress這類資源決定了如何訪問運行中的應用。Service服務為一組 Pod 提供固定的訪問入口和負載均衡。它主要有四種類型ClusterIP集群內部訪問、NodePort節點端口映射通過節點 IP端口訪問、LoadBalancer對接云廠商負載均衡器和Headless用于 StatefulSet 的穩定 DNS。Ingress入口管理集群外部訪問集群內服務的七層HTTP/HTTPS路由。例如根據域名api.example.com路由到api-service根據路徑/web路由到web-service。2.理解標簽與service中的endpoint建立一個service[rootk8s-master ~]# mkdir service/ [rootk8s-master ~]# cd service/ [rootk8s-master service]# kubectl create service clusterip --tcp 80:80 testservice --dry-runclient -o yaml testservice.yaml [rootk8s-master service]# vim testservice.yaml apiVersion: v1 kind: Service metadata: labels: app: testservice name: testservice spec: ports: - name: webport port: 80 protocol: TCP targetPort: 80 selector: app: webserver type: ClusterIP [rootk8s-master service]# kubectl apply -f testservice.yml service/testservice created [rootk8s-master service]# kubectl get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE kubernetes ClusterIP 10.96.0.1 none 443/TCP 13d testservice ClusterIP 10.100.99.225 none 80/TCP 4s [rootk8s-master service]# kubectl describe svc testservice建立pod并測試pod是否可以被testservice暴漏[rootk8s-master service]# kubectl run webserver --image myapp:v1 --dry-runclient -o yaml webserver.yml [rootk8s-master service]# vim webserver.yml apiVersion: v1 kind: Pod metadata: labels: run: webserver name: webserver spec: containers: - image: myapp:v1 name: webserver [rootk8s-master service]# kubectl get pods -o wide;kubectl describe service testservice由于標簽沒有匹配上所以此時并沒有被暴露更改標簽然后觀察[rootk8s-master service]# kubectl label pods webserver appwebserver pod/webserver labeled [rootk8s-master service]# kubectl describe service testservice [rootk8s-master service]# curl 10.100.99.225 Hello MyApp | Version: v1 | a hrefhostname.htmlPod Name/a3.利用service暴漏控制器監控[rootk8s-master service]# watch -n 1 kubectl describe svc webservice ; kubectl get deploy --show-labels;kubectl get pods -o wide --show-labels 生成控制器和service的組合yam[rootk8s-master service]# kubectl create service clusterip --tcp 80:80 webservice --dry-runclient -o yaml webservice.yaml [rootk8s-master service]# kubectl create deployment webcluster --image myapp:v1 --dry-runclient -o yaml webservice.yaml [rootk8s-master service]# vim webservice.yaml apiVersion: v1 kind: Service metadata: labels: app: webservice name: webservice spec: port: 80 protocol: TCP targetPort: 80 selector: app: webcluster type: ClusterIP --- apiVersion: apps/v1 kind: Deployment metadata: labels: app: webcluster name: webcluster spec: replicas: 2 selector: matchLabels: app: webcluster template: metadata: labels: app: webcluster spec: containers: - image: myapp:v1 name: myapp生成控制器和service[rootk8s-master service]# kubectl apply -f webservice.yaml #測試 [rootk8s-master service]# curl 10.100.140.222 [rootk8s-master service]# curl 10.100.140.222/hostname.html [rootk8s-master service]# curl 10.100.140.222/hostname.html二、service的ipvs模式Service 是由 kube-proxy 組件加上 iptables 來共同實現的kube-proxy 通過 iptables 處理 Service 的過程需要在宿主機上設置相當多的 iptables 規則如果宿主機有大量的Pod不斷刷新iptables規則會消耗大量的CPU資源IPVS模式的service可以使K8s集群支持更多量級的Pod注意切換ipvs模式后kube-proxy會在宿主機上添加一個虛擬網卡kube-ipvs0并分配所有service IP1.在所有節點中安裝ipvsadm工具[rootk8s-master service]# for name in 100 10 20 200 do ssh -l root 172.25.254.$name dnf install ipvsadm -y done2.配置集群中的kube-proxy重啟pod在pod運行時配置文件中采用默認配置當改變配置文件后已經運行的pod狀態不會變化所以要重啟pod[rootk8s-master service]# kubectl -n kube-system edit cm kube-proxy 59 mode: ipvs [rootk8s-master service]# kubectl -n kube-system get pods kube-proxy-n7zrb 1/1 Running 1 (28h ago) 8d kube-proxy-pq7qn 1/1 Running 0 8d kube-proxy-r6zc7 1/1 Running 1 (28h ago) 8d [rootk8s-master service]# kubectl -n kube-system get pods |awk /proxy/{system(kubectl -n kube-system delete pods $1)} pod kube-proxy-n7zrb deleted from kube-system namespace pod kube-proxy-pq7qn deleted from kube-system namespace pod kube-proxy-r6zc7 deleted from kube-system namespace3.效果[rootk8s-master service]# ipvsadm -Ln三、Service的類型微服務類型作用描述ClusterIP默認值k8s系統給service自動分配的虛擬IP只能在集群內部訪問NodePort將Service通過指定的Node上的端口暴露給外部訪問任意一個NodeIP:nodePort都將路由到ClusterIPLoadBalancer在NodePort的基礎上,借助cloud provider創建一個外部的負載均衡器并將請求轉發到 NodeIP:NodePort此模式只能在云服務器上使用ExternalName將服務通過 DNS CNAME 記錄方式轉發到指定的域名通過 spec.externlName 設定1.ClusterIPyaml文件內容[rootk8s-master service]# vim webservice.yaml apiVersion: v1 kind: Service metadata: labels: app: webservice name: webservice spec: ports: - name: webport port: 80 protocol: TCP targetPort: 80 selector: app: webcluster type: ClusterIP --- apiVersion: apps/v1 kind: Deployment metadata: labels: app: webcluster name: webcluster spec: replicas: 2 selector: matchLabels: app: webcluster template: metadata: labels: app: webcluster spec: containers: - image: myapp:v1 name: myapp [rootk8s-master service]# kubectl apply -f webservice.yaml集群內部解析注意集群內部通常使用service的解析名稱進行通信地址的指定因為資源的ip會變但是名字不會[rootk8s-master service]# kubectl -n kube-system get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE calico-typha ClusterIP 10.97.97.73 none 5473/TCP 28h kube-dns ClusterIP 10.96.0.10 none 53/UDP,53/TCP,9153/TCP 13d [rootk8s-master service]# dig webservice.default.svc.cluster.local 10.96.0.10clusterIP的headless模式當設定此模式那么service不會被分配一個ip而是直接把endpoints上的ip直接通過dns裸漏[rootk8s-master service]# vim webservice.yaml apiVersion: v1 kind: Service metadata: labels: app: webservice name: webservice spec: ports: - name: webport port: 80 protocol: TCP targetPort: 80 selector: app: webcluster type: ClusterIP clusterIP: None ##加上這條 --- apiVersion: apps/v1 kind: Deployment metadata: labels: app: webcluster name: webcluster spec: replicas: 2 selector: matchLabels: app: webcluster template: metadata: labels: app: webcluster spec: containers: - image: myapp:v1 name: myapp [rootk8s-master service]# kubectl apply -f webservice.yaml#查看解析 [rootk8s-master service]# dig webservice.default.svc.cluster.local 10.96.0.102.nodePort模式nodePort的yaml文件內容[rootk8s-master service]# vim webservice.yaml apiVersion: v1 kind: Service metadata: labels: app: webservice name: webservice spec: ports: - name: webport port: 80 protocol: TCP targetPort: 80 nodePort: 30001 #指定端口如不寫可以從30000~32767之間隨機分 selector: app: webcluster type: NodePort #NodePort模式 --- apiVersion: apps/v1 kind: Deployment metadata: labels: app: webcluster name: webcluster spec: replicas: 2 selector: matchLabels: app: webcluster template: metadata: labels: app: webcluster spec: containers: - image: myapp:v1 name: myapp [rootk8s-master service]# kubectl apply -f webservice.yaml查看策略與訪問測試[rootk8s-master service]# ipvsadm -Ln TCP 172.25.254.100:30001 rr - 10.224.36.78:80 Masq 1 0 0 - 10.224.169.157:80 Masq 1 0 0 TCP 10.244.0.0:30001 rr - 10.224.36.78:80 Masq 1 0 0 - 10.224.169.157:80 Masq 1 0 0 [rootk8s-master service]# curl 172.25.254.100:30001 Hello MyApp | Version: v1 | a hrefhostname.htmlPod Name/a [rootk8s-master service]# curl 172.25.254.100:30001/hostname.html webcluster-77c87d9946-tg8qr [rootk8s-master service]# curl 172.25.254.100:30001/hostname.html webcluster-77c87d9946-kjc9n端口破限默認端口范圍30000~32767[rootk8s-master service]# vim /etc/kubernetes/manifests/kube-apiserver.yaml 42 - --service-node-port-range30000-50000 [rootk8s-master service]# kubectl -n kube-system delete pods all [rootk8s-master service]# vim webservice.yaml nodePort: 44444 [rootk8s-master service]# kubectl apply -f webservice.yaml3.loadbalancerloadbalancer的yaml文件內容[rootk8s-master service]# cp webservice.yaml loadbalancer.yml [rootk8s-master service]# vim loadbalancer.yml apiVersion: v1 kind: Service metadata: labels: app: webservice name: webservice spec: ports: - name: webport port: 80 protocol: TCP targetPort: 80 selector: app: webcluster type: LoadBalancer #指定LoadBalancer模式 --- apiVersion: apps/v1 kind: Deployment metadata: labels: app: webcluster name: webcluster spec: replicas: 2 selector: matchLabels: app: webcluster template: metadata: labels: app: webcluster spec: containers: - image: myapp:v1 name: myapp [rootk8s-master service]# kubectl apply -f loadbalancer.yml [rootk8s-master metaLLB]# kubectl get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE kubernetes ClusterIP 10.96.0.1 none 443/TCP 13d webservice LoadBalancer 10.102.221.3 none 80:43957/TCP 3m59s構建metalLB[rootk8s-master service]# tar zxf metallb-v0.16.1.tar.gz [rootk8s-master service]# cd metaLLB/ [rootk8s-master metaLLB]# ls 1-metallb-native.yaml 2-metallb-confmap.yml metallb-v0.16.1.tar #鏡像推入harbor倉庫 [rootk8s-master metaLLB]# docker load -i metallb-v0.16.1.tar [rootk8s-master metaLLB]# docker tag quay.io/metallb/controller:v0.16.1 reg.timinglee.org/metallb/controller:v0.16.1 [rootk8s-master metaLLB]# docker tag quay.io/metallb/speaker:v0.16.1 reg.timinglee.org/metallb/speaker:v0.16.1 [rootk8s-master metaLLB]# docker push reg.timinglee.org/metallb/controller:v0.16.1 [rootk8s-master metaLLB]# docker push reg.timinglee.org/metallb/speaker:v0.16.1 #更新proxy [rootk8s-master mateLLB]# kubectl edit configmap -n kube-system kube-proxy 59 mode: ipvs 60 ipvs: 61 strictARP: true [rootk8s-master metaLLB]# kubectl -n kube-system get pods |awk /proxy/{system(kubectl -n kube-system delete pods $1)} #修改配置文件的鏡像位置 [rootk8s-master metaLLB]# vim 1-metallb-native.yaml [rootk8s-master metaLLB]# grep image: 1-metallb-native.yaml 1-metallb-native.yaml: image: metallb/controller:v0.16.1 1-metallb-native.yaml: image: metallb/speaker:v0.16.1 #設定獲取ip范圍 [rootk8s-master metaLLB]# vim 2-metallb-confmap.yml apiVersion: metallb.io/v1beta1 kind: IPAddressPool metadata: name: first-pool namespace: metallb-system spec: addresses: - 172.25.254.50-172.25.254.99 --- apiVersion: metallb.io/v1beta1 kind: L2Advertisement metadata: name: example namespace: metallb-system spec: ipAddressPools: - first-pool驗證[rootk8s-master metaLLB]# kubectl apply -f 1-metallb-native.yaml #等待1的配置加載完成 [rootk8s-master metaLLB]# kubectl apply -f 2-metallb-confmap.yml [rootk8s-master metaLLB]# kubectl get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE kubernetes ClusterIP 10.96.0.1 none 443/TCP 13d webservice LoadBalancer 10.102.221.3 172.25.254.50 80:43957/TCP 26m4.extrnalname[rootk8s-master service]# kubectl create svc externalname externalname --external-namewww.timinglee.org --dry-runclient -o yaml externalname.yaml [rootk8s-master service]# vim externalname.yaml apiVersion: v1 kind: Service metadata: labels: app: externalname name: externalname spec: externalName: www.timinglee.org selector: app: externalname type: ExternalName [rootk8s-master service]# kubectl apply -f externalname.yaml [rootk8s-master service]# kubectl get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE externalname ExternalName none www.timinglee.org none 39s kubernetes ClusterIP 10.96.0.1 none 443/TCP 13d四、ingress七層代理1.ingress的部署下載deploy文件[rootk8s-master service]# tar zxf ingress.1.15.1.tar.gz [rootk8s-master service]# cd ingress-v1.15.1 [rootk8s-master ingress-v1.15.1]# wget https://raw.githubusercontent.com/kubernetes/ingress-nginx/controller-v1.15.1/deploy/static/provider/baremetal/deploy.yaml準備ingress所需鏡像[rootk8s-master ingress-v1.5.1]# docker load -i ingress-v1.15.1.tar [rootk8s-master ingress-v1.5.1]# docker tag registry.k8s.io/ingress-nginx/controller:v1.15.1 reg.timinglee.org/ingress-nginx/controller:v1.15.1 [rootk8s-master ingress-v1.5.1]# docker push reg.timinglee.org/ingress-nginx/controller:v1.15.1 [rootk8s-master ~]# docker tag registry.k8s.io/ingress-nginx/kube-webhook-certgen:v1.6.9 reg.timinglee.org/ingress-nginx/kube-webhook-certgen:v1.6.9 [rootk8s-master ~]# docker push reg.timinglee.org/ingress-nginx/kube-webhook-certgen:v1.6.9更改deploy.yaml[rootk8s-master ingress-v1.5.1]# vim deploy.yaml 444: image: ingress-nginx/controller:v1.15.1 547: image: ingress-nginx/kube-webhook-certgen:v1.6.9 603: image: ingress-nginx/kube-webhook-certgen:v1.6.9 365 type: LoadBalancer [rootk8s-master ingress-v1.5.1]# kubectl apply -f deploy.yaml [rootk8s-master ingress-v1.5.1]# kubectl get -n ingress-nginx svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE ingress-nginx-controller LoadBalancer 10.111.155.83 172.25.254.51 80:30805/TCP,443:32333/TCP 7d1h ingress-nginx-controller-admission ClusterIP 10.101.96.196 none 443/TCP 7d1h2.ingress功能的基本實現pathtypeImplementationSpecific通配符匹配| Exact完全匹配| Prefix前綴匹配注意ingress必須和輸出的service資源處于同一namespace建立ingress代理的微服務[rootk8s-master ingress-v1.5.1]# kubectl create deployment myappv1 --image myapp:v1 --replicas 2 --dry-runclient -o yaml myappv1.yaml [rootk8s-master ingress-v1.5.1]# kubectl create service clusterip servicev1 --tcp 80:80 --dry-runclient -o yaml myappv1.yaml [rootk8s-master ingress-v1.5.1]# vim myappv1.yaml apiVersion: apps/v1 kind: Deployment metadata: labels: app: myappv1 name: myappv1 spec: replicas: 2 selector: matchLabels: app: myappv1 template: metadata: labels: app: myappv1 spec: containers: - image: myapp:v1 name: myapp --- apiVersion: v1 kind: Service metadata: labels: app: servicev1 name: servicev1 spec: ports: - name: serviceportv1 port: 80 protocol: TCP targetPort: 80 selector: app: myappv1 type: ClusterIP #同樣方式建立myappv2 [rootk8s-master ingress-v1.5.1]# kubectl apply -f myappv1.yaml [rootk8s-master ingress-v1.5.1]# kubectl apply -f myappv2.yaml建立ingress[rootk8s-master ingress-v1.5.1]# kubectl create ingress ingress1 --class nginx --rule */servicev1:80 --dry-runclient -o yaml 1-ingress.yml [rootk8s-master ingress-v1.5.1]# vim 1-ingress.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: nginx.ingress.kubernetes.io/rewrite-target: / spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: /v1 pathType: Prefix - backend: service: name: servicev2 port: number: 80 [rootk8s-master ingress-v1.5.1]# kubectl apply -f 1-ingress.yml [rootk8s-master ingress-v1.5.1]# kubectl describe ingress ingress1測試[rootk8s-master ingress-v1.5.1]# vim /etc/hosts 172.25.254.51 www.timinglee.org [rootk8s-master ingress-v1.5.1]# curl www.timinglee.org/v1 Hello MyApp | Version: v1 | a hrefhostname.htmlPod Name/a [rootk8s-master ingress-v1.5.1]# curl www.timinglee.org/v2 Hello MyApp | Version: v2 | a hrefhostname.htmlPod Name/a3.基于域名的訪問[rootk8s-master ingress-v1.5.1]# vim 2-ingress.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: nginx.ingress.kubernetes.io/rewrite-target: / spec: ingressClassName: nginx rules: - host: myapp1.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: / pathType: Prefix - host: myapp2.timinglee.org http: paths: - backend: service: name: servicev2 port: number: 80 path: / pathType: Prefix [rootk8s-master ingress-v1.5.1]# kubectl apply -f 2-ingress.yml測試[rootk8s-master ingress-v1.5.1]# vim /etc/hosts 172.25.254.51 www.timinglee.org myapp1.timinglee.org myapp2.timinglee.org [rootk8s-master ingress-v1.5.1]# curl myapp1.timinglee.org Hello MyApp | Version: v1 | a hrefhostname.htmlPod Name/a [rootk8s-master ingress-v1.5.1]# curl myapp2.timinglee.org Hello MyApp | Version: v2 | a hrefhostname.htmlPod Name/a4.基于動靜分離的方式[rootk8s-master ingress-v1.5.1]# vim 3-ingress.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: nginx.ingress.kubernetes.io/use-regex: true nginx.ingress.kubernetes.io/rewrite-target: /index.html spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: /php pathType: ImplementationSpecific - backend: service: name: servicev2 port: number: 80 path: /static pathType: ImplementationSpecific5.tls加密訪問[rootk8s-master ingress-v1.5.1]# openssl req -newkey rsa:2048 -nodes -keyout tls.key -x509 -days 365 -subj /CNnginxsvc/Onginxsvc -out tls.crt [rootk8s-master ingress-v1.5.1]# kubectl create secret tls web-tls-secret --key tls.key --cert tls.crt [rootk8s-master ingress-v1.5.1]# vim 4-ingress.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: nginx.ingress.kubernetes.io/ssl-redirect: true nginx.ingress.kubernetes.io/rewrite-target: / spec: ingressClassName: nginx tls: - hosts: - www.timinglee.org secretName: web-tls-secret rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: / pathType: Prefix6.auth認證生成認證文件并注入集群中[rootk8s-master ingress-v1.5.1]# dnf install httpd-tools -y [rootk8s-master ingress-v1.5.1]# htpasswd -cm auth admin #注入集群 [rootk8s-master ingress-v1.5.1]# kubectl create secret generic web-auth --from-file auth在ingress中配置auth認證[rootk8s-master ingress-v1.5.1]# vim 5-ingress.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: nginx.ingress.kubernetes.io/auth-type: basic nginx.ingress.kubernetes.io/auth-secret: web-auth nginx.ingress.kubernetes.io/auth-realm: Please input username and password nginx.ingress.kubernetes.io/rewrite-target: / spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: /v1 pathType: Prefix7.ingress中的網頁重寫利用網頁從寫定義默認發布文[rootk8s-master ingress-v1.5.1]# vim 6-ingress.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: nginx.ingress.kubernetes.io/rewrite-target: /$2 nginx.ingress.kubernetes.io/use-regex: true spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: / pathType: Prefix - backend: service: name: servicev2 port: number: 80 path: /lee/(.*) pathType: ImplementationSpecific [rootk8s-master ingress-v1.5.1]# kubectl apply -f 6-ingress.yml利用正側表達式從定向網頁[rootk8s-master ingress-v1.5.1]# vim 7-ingress.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: nginx.ingress.kubernetes.io/rewrite-target: /$2 nginx.ingress.kubernetes.io/use-regex: true spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: / pathType: Prefix - backend: service: name: servicev2 port: number: 80 path: /lee/(.*) pathType: ImplementationSpecific五、金絲雀發布cannary金絲雀發布Canary Release也稱為灰度發布是一種軟件發布策略。主要目的是在將新版本的軟件全面推廣到生產環境之前先在一小部分用戶或服務器上進行測試和驗證以降低因新版本引入重大問題而對整個系統造成的影響。是一種Pod的發布方式。金絲雀發布采取先添加、再刪除的方式保證Pod的總量不低于期望值。并且在更新部分Pod后暫停更新當確認新Pod版本運行正常后再進行其他版本的Pod的更新。1.基于headr的灰度發布[rootk8s-master ingress-v1.5.1]# vim cannary-header.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: / pathType: Prefix --- apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress2 annotations: nginx.ingress.kubernetes.io/canary: true nginx.ingress.kubernetes.io/canary-by-header: version nginx.ingress.kubernetes.io/canary-by-header-value: 2 spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev2 port: number: 80 path: / pathType: Prefix2.基于權重的灰度發布[rootk8s-master ingress-v1.5.1]# vim cannary-weight.yml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress1 annotations: spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev1 port: number: 80 path: / pathType: Prefix --- apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: ingress2 annotations: nginx.ingress.kubernetes.io/canary: true nginx.ingress.kubernetes.io/canary-weight: 50 nginx.ingress.kubernetes.io/canary-weight-total: 100 spec: ingressClassName: nginx rules: - host: www.timinglee.org http: paths: - backend: service: name: servicev2 port: number: 80 path: / pathType: Prefix [rootk8s-master ingress-v1.5.1]# kubectl apply -f cannary-weight.yml編寫測試腳本[rootk8s-master ingress-v1.5.1]# vim check_cannary.sh #!/bin/bash v10 v20 for (( i0; i100; i)) do responsecurl -s www.timinglee.org |grep -c v1 v1expr $v1 $response v2expr $v2 1 - $response done echo v1:$v1, v2:$v2 [rootk8s-master ingress-v1.5.1]# sh check_cannary.sh v1:52, v2:48